The 3^rd International Conference on Innovations in Electrical, Electronics& CommunicationEngineering–3^rdICIEECE-2025istobeheldon25-10- 2025& 26-10-2025 at St. Ann’s College of Engineering& Technology, Chirala, Bapatla, Andhra Pradesh, India. The Conference provides an opportunity to Research Scholars, Faculty, Industry Professionals, Delegates and Students to interact and share their experience and knowledge in the fields of Electrical, Electronics& Communications Branches and also other branches (Multidisciplinary).

The 3^rd ICIEECE – 2025 will bean exceptional international forum for sharing knowledge and results in Innovations, Recent Challenges in Engineering Technology and Sciences. The aim of the Conference is to provide a platform to the researchers and practitioners from both academia as well as industry to meet and share cutting edge developments in the relevant fields. An engineer is a professional practitioner of engineering, concerned with applying scientific knowledge,mathematics,andingenuitytodevelopsolutionsforthetechnological andsocietal problems. Therefore, an ideal engineerisa composite andto operate at the interface between science and society.

The3^RDICIEECE-2025canthrowupseveralnewideasandsolutions to address the present-day innovations in the fields of Science, Engineering and Technology. The scope of the conference is broad and covers many aspects of internationaltechnologyprospective. Thisconference aimstoprovidea scholarly platform for participants to publish their research indexed by Elsevier and scholarly online Journals with DOI with a separate fee.

St. Ann’s College of Engineering & Technology (SACET) was established in the year 2001 at Vetapalem Mandal, Chirala, Bapatla District, Andhra Pradesh by the St. Mary Educational Society, pioneered by Educationalists, Industrialists, and Philanthropists.

The college is housed amidst lush green fields, in a serene environment, free from pollution and conducive for the pursuit of education. The Bay of Bengal is just 2 km away from the college.

The institution is approved by AICTE, New Delhi and is permanently affiliated to JNTUK, Kakinada, Andhra Pradesh, India. It has been accredited thrice by the National Board of Accreditation (NBA) and is permanently accredited by the Institution of Engineers (IE). The institution is also accredited by NAAC with an ‘A’ Grade in both I and II cycles, and is recognized by UGC under Section 2(f) and 12(B) of the UGC Act, 1956. It was awarded ‘A’ Grade by the Andhra Pradesh State Government.

The college has an MoU with ISRO Space Application Center, Ahmedabad and is approved as TSDI [Siemens] by the Andhra Pradesh State Government. At present, the status of the institution is “Autonomous”.

Call for Papers – 3rd ICIEECE 2025

International Conference on Innovations in Electrical, Electronics & Communication Engineering
St. Ann’s College of Engineering & Technology (SACET), Chirala, Bapatla District, Andhra Pradesh, India

Full paper submissions are invited from faculty, emerging researchers, and enthusiastic students for the 3rd International Conference on Innovations in Electrical, Electronics & Communication Engineering (ICIEECE-2025) to be held at St. Ann’s College of Engineering & Technology, Chirala, Andhra Pradesh, India.

This conference provides an excellent platform for researchers, academicians, students, innovators, scientists, and industry professionals to present, discuss, and exchange ideas on advanced innovations and best practices in Electrical, Electronics, and Communication Engineering. Constructive feedback, expert engagement, and opportunities for collaboration are key highlights of this event.

Selected extended papers from the conference will be published in Scopus-indexed journals (with an additional fee).

Conference Tracks (but not limited to the following multidisciplinary areas):

1. Sustainable Energy and Smart Grids

• Renewable energy sources and grid integration

• Energy storage and management

• Power electronics for green energy

• Smart grid technologies and IoT integration

• Electric vehicles and charging infrastructure

• Power system reliability and stability

2. Wireless Communication and Networking

• 5G/6G technologies and beyond

• Internet of Things (IoT) and its applications

• Wireless sensor networks and smart cities

• Satellite communication and space networks

• Network security and cryptography

• Cognitive radio and dynamic spectrum access

3. Robotics, Control Systems, and Automation

• Robotics and autonomous systems

• Industrial automation and process control

• Mechatronics and embedded systems

• AI and machine learning in control systems

• Cyber-physical systems

• Human-robot interaction and collaborative robots (Cobots)

4. Signal Processing and Image Processing

• Digital signal processing techniques

• Speech and audio processing

• Biomedical signal processing

• Image and video compression

• Pattern recognition & ML for image analysis

• Applications in multimedia and virtual reality

5. Embedded Systems and VLSI Design

• Low-power VLSI design and technology

• FPGA-based design and applications

• Real-time embedded systems

• System-on-Chip (SoC) and hardware accelerators

• IoT and edge computing

• Wearable technology and embedded AI

6. Artificial Intelligence and Machine Learning in ECE/EEE

• AI applications in power systems

• AI for wireless communication and networks

• ML in signal and image processing

• AI in robotics and automation

• AI for embedded systems and IoT

• Deep learning & neural networks in hardware

7. Electromagnetic and Microwave Engineering

• Antenna design and wave propagation

• Microwave and millimeter-wave circuits

• RF and microwave engineering for 5G/6G

• Terahertz technology and applications

• Electromagnetic compatibility and interference

• Computational electromagnetics and simulation

8. Optoelectronics and Photonics

• Optical fiber communication and networking

• Photonic integrated circuits (PICs)

• Laser technologies and applications

• Quantum optics and communication

• Optical sensors and imaging systems

• Nonlinear optics and nanophotonics

9. Nanotechnology and Materials in Electronics

• Nanomaterials for electronics and energy

• Nanoscale device fabrication and characterization

• Graphene and 2D materials in electronics

• Organic electronics and flexible devices

• Nanoelectronics for energy harvesting

• MEMS and NEMS

10. Biomedical Electronics and Healthcare Technology

• Wearable medical devices and sensors

• Biomedical signal processing and diagnostics

• Telemedicine and e-health solutions

• Imaging systems for healthcare

• AI and IoT in healthcare

• Biomedical instrumentation and bioelectronics

11. Quantum Computing and Communication

• Quantum circuits and algorithms

• Quantum communication protocols

• Quantum sensors and cryptography

• Quantum computing hardware/software

• Quantum information theory

• Applications in electronics & communication

12. Internet of Things (IoT) and Cyber-Physical Systems

• IoT networks and cloud integration

• Edge computing and IoT security

• Smart cities and smart infrastructure

• Industrial IoT (IIoT) applications

• AI-driven predictive analytics in IoT

• Cyber-physical systems and security

13. Power Electronics and Electric Drives

• Power conversion technologies

• Motor drives and electric vehicles

• Energy-efficient power systems

• High-frequency converters and inverters

• Power electronics for renewable energy

• Advanced control in power systems

14. Advanced Semiconductor Technologies

• Next-generation semiconductor devices

• GaN and SiC technologies

• Advanced MOSFETs and transistors

• Nano-CMOS and FinFET devices

• Emerging semiconductor materials

• Semiconductor fabrication and packaging

15. Satellite and Space Communication

• Low Earth Orbit (LEO) communication systems

• Inter-satellite communication networks

• Remote sensing and satellite imaging

• Deep space communication systems

• Space-based IoT applications

• Space weather and communication impacts

Article Submission

Please submit your articles to:
📧 papers.iirmsdt@gmail.com, blsdteservices@gmail.com

Publication Opportunities

• Quality articles will be published in Scopus / Web of Science journals (with a separate fee).

• Through the conference, research articles will also be published in Scopus, Web of Science, UGC Care, and SCI journals (with a separate fee).

Registration Fees (Per Article)

• B.Tech Students: ₹1400/-

• M.Tech Students: ₹1600/-

• Academicians / Practitioners / Industrialists: ₹2500/-

• Ph.D. / Post-Doctoral Researchers: ₹2900/-

• Foreign Participants: $150

Additional Charges

• Hard copy of Conference Certificate, Membership Certificate, and Proceedings will be posted to your address with a separate fee of ₹2500/-.